BCS-PAN-KAM(4)
BCS LINE
12524
A camera module with a single call button for the IP/2-wire IP modular panel system.
It can be used as a single-family panel when fitted into a single BCS-RA1-N frame, or it can be expanded with additional modules featuring call buttons, information displays or access control devices (keypad, card reader, fingerprint reader).
When using additional modules, frames from the BCS-RA2-N or BCS-RA3-N series should be used (depending on the size and number of modules).
Once fitted into the frame, the unit can be installed either flush-mounted or surface-mounted using a dedicated housing, depending on the size of the frame used (mounting housings and frames are available separately).
Polityka bezpieczeństwa
(edytuj w module Customer Reassurance)
Zasady dostawy
(edytuj w module Customer Reassurance)
Zasady zwrotu
(edytuj w module Customer Reassurance)
Description
- Dual-protocol TCP/IP/SIP camera module with a button
- Designed for IP or 2-wire IP systems – in IP mode, it works with LAN switches / PoE switches; in 2-wire mode, it is powered and transmits the signal via a 2-wire bus (requires the BCS-ADIP-II/-III adapter, together with the BCS-ZA4815 or ZA4820 power supply)
- Compatible with TCP/IP/SIP video monitors running SIP version 4.4 or higher (IP mode); in 2-wire mode, it works with video monitors from the BCS-MON7600B(W)-2 series
- 1.9 mm fish-eye lens, field of view: 168.6° (H), 87.1° (V)
- Auto IR illuminator, auto ICR infrared filter, 120 dB WDR, HLC, BLC, 3DNR noise reduction
- For installation in BCS-RA1-N, BCS-RA2-N and BCS-RA3-N frames
- Built-in web service for device management
- Anodised aluminium front panel, IK07
Product Details
12524
5904890713758
Data sheet
- Product
- PAN-KAM(4)
- Product line
- BCS LINE
- Video compression
- H.264, H.265
- Alarm in
- Przycisk wyjścia, kontaktron
- Alarm out
- Yes, for future use
- Device type
- Camera Module
- Power supply
- 48V DC / PoE(802.3at/af/passive)
- Call buttons
- depending on configuration
- System type
- IP, 2-wire IP
- Proximity reader
- Depending on configuration
- Keyboard
- Depending on configuration
- Number of door opening codes
- Zależnie od konfiguracji
- Finger print reader
- Depending on configuration
- Display
- Depending on configuration
- Information leds
- Depending on configuration
- Camera sensor
- 1/2.9''
- Camera resolution
- Strumień główny: max 720p; strumień dodatkowy max 1080p
- Onvif compatibility
- Yes
- Camera horizontal angle of view
- 168.6
- Camera lens
- 1.9 fisheye
- Lens regulation (left/right)
- No
- Camera illumination
- IR
- Ethernet
- Built-in
- Network connection
- 10/100 Mb/s Ethernet, magistrala 2-wire
- 12V power supply output
- Tak, 12VDC 600mA (wymagany switch PoE+)
- Wiegand output
- No
- Panel color
- Silver
- Panel dimensions (mm)
- 100×100×49.4
- Panel weight (g)
- 430
- Mounting type
- Surface / Recessed
- Material
- Aluminum alloy
- Working environment (temperature)
- -30°C ~ +60°C
- IP class
- IP65
- IK class
- IK07
- Max power consumption
- 5W
- Number of supported places
- Depending on configuration (max 200)
- Built-in web server
- Tak
- Menu language
- PL, ENG, IT, ESP, DE, PT, TR, CZ, SL, GRE, LT
- Voice messages
- Tak
- Relay output
- 1x NO/NC/COM
- RS485 output
- Tak, do podłączenia modułu BCS-MODK-III
Accessories
Reference: 11230
Brand: BCS LINE
BCS-MODKD-III
RS485 relay module for outdoor panels, for controlling additional doors or gates. Compatible with all outdoor panels in the BCS Line series, except the BCS-L-PAN1210S-S.
Matches products
Reference: 9807
Brand: BCS LINE
BCS-PAN-LCD
LCD display module for the modular panel system. To be fitted in the dedicated BCS-RA1-N, BCS-RA2-N and BCS-RA3-N frames. Requires the BCS-PAN-KAM(4) camera module to operate.
Reference: 9802
Brand: BCS LINE
BCS-PAN-K-N
Keypad module for the modular panel system. It enables users to open doors or gates using a code, call any flat, connect to the BCS-CP2 concierge unit, and navigate the list of flats (in conjunction with the BCS-PAN-LCD display module). Installation in dedicated BCS-RA1-N, BCS-RA2-N and BCS-RA3-N frames. Requires the BCS-PAN-KAM(4) camera module to...
Reference: 9940
Brand: BCS LINE
BCS-PAN-B-N
A slave fingerprint reader module for a modular panel system. Used to open doors or gates using a fingerprint. Installation in dedicated BCS-RA1-N, BCS-RA2-N and BCS-RA3-N frames. Requires the BCS-PAN-KAM(4) camera module to operate.
Reference: 9805
Brand: BCS LINE
BCS-PAN-C-N
Proximity reader slave module. Frequency: 13.56 MHz. Used to open doors or gates using a proximity transponder. Installation in dedicated BCS-RA1-N, BCS-RA2-N and BCS-RA3-N frames. Requires the BCS-PAN-KAM(4) camera module to operate.
Reference: 9804
Brand: BCS LINE
BCS-PAN-P5-N
A module with five call buttons for the modular panel system. For installation in dedicated BCS-RA1-N, BCS-RA2-N and BCS-RA3-N frames. Requires the BCS-PAN-KAM(4) camera module to operate.
Reference: 9803
Brand: BCS LINE
BCS-PAN-P2-N
A module with two call buttons for the modular panel system. For installation in dedicated BCS-RA1-N, BCS-RA2-N and BCS-RA3-N frames. Requires the BCS-PAN-KAM(4) camera module to operate.
Reference: 9941
Brand: BCS LINE
BCS-PAN-P1-N
A module with a single call button for the modular panel system. For installation in dedicated BCS-RA1-N, BCS-RA2-N and BCS-RA3-N frames. Requires the BCS-PAN-KAM(4) camera module to operate.
Reference: 9942
Brand: BCS LINE
BCS-PAN-LED
LED information module for a modular panel system. Displays the system status via LEDs – connection, call, door open. For installation in dedicated frames: BCS-RA1-N, BCS-RA2-N, BCS-RA3-N. Requires the BCS-PAN-KAM(4) camera module to operate.
Reference: 11059
Brand: BCS LINE
BCS-PAN-C2-N
A secondary contactless card reader module for a modular panel system. Frequency: 125 kHz. Used to open doors or gates using a proximity transponder. To be fitted in dedicated frames: BCS-RA1-N, BCS-RA2-N, BCS-RA3-N. Requires the BCS-PAN-KAM(4) camera module to operate.
Reference: 12797
Brand: BCS LINE
BCS-PAN-INFO
A secondary information module for the BCS modular panel system. Built-in nameplate holder with LED backlighting. Powered and controlled by the PAN-KAM(4) camera module. Installation in BCS-RA1/RA2/RA3-N frames. Flush-mounted or surface-mounted using a dedicated housing (depending on the frame size). Surface-mounted and flush-mounted housings...
A camera module with a single call button for the IP/2-wire IP modular panel system.
It can be used as a single-family panel when fitted into a single BCS-RA1-N frame, or it can be expanded with additional modules featuring call buttons, information displays or access control devices (keypad, card reader, fingerprint reader).
When using additional modules, frames from the BCS-RA2-N or BCS-RA3-N series should be used (depending on the size and number of modules).
Once fitted into the frame, the unit can be installed either flush-mounted or surface-mounted using a dedicated housing, depending on the size of the frame used (mounting housings and frames are available separately).
Many years of experience supported by knowledge and commitment
Help and technical support
Efficient service of devices